FXO Module
The X100M FXO module allows the TDM400P card or TDM800P card to terminate analog telephone lines (POTS).Because of the modular design, a user can activate additional ports at any time with more FXS-100 or X100M daughter cards. The X100M module passes all the call features any standard analog telephone line will support. Worldwide certifications are pending.
使用了深圳檳城的半導體防雷管，通過了ITU-K.21(07-2003)浪涌測試，品質有保障！
FXO 模塊, 就是所謂的外線模塊, 用於連接來自PSTN的電話線.
本物品用於配合 TDM400P, TDM1200P 和其他標準FXO接口使用.
X100M FXO Module
The X100M FXO module allows the TDM400P card to terminate analog telephone lines (POTS).
Because of the modular design, a user can activate additional ports at any time with more S110M or X100M daughter cards. The X100M module passes all the call features any standard analog telephone line will support. Worldwide certifications are pending.
What are FXS and FXO?
FXS (Foreign Exchange Station)
FXS is an interface which drives a telephone. FXS interfaces get phones plugged into them, deliver battery, and provide ringing. The FXS interface initiates and sends a ringing voltage to the FXO interface.
FXO (Foreign Exchange Office)
FXO is an interface that connect to a phone line. They supply your PBX with access to the public telephone network. FXS interfaces are what allow you to hook telephones to your PBX, and FXO interfaces allow you to connect your PBX to real analog phone lines. FXO interfaces receives the ringing voltage from the FXS interface.
The phone receiving the call is the last FXO device in the chain, and when it receives voltage from an FXS device, the phone will ring.
Setup
To receive voltage from outside lines, connect the outside line to an FXO port on your Asterisk server. Then connect the phones to FXS ports on your Asterisk server. When the FXO module in your Asterisk Server receives the voltage, it will then generate voltage using the FXS module and send it to your analog phone.
